A Session Initiation Protocol (SIP) Response Code for Rejected Calls

The IETF has been addressing numerous issues surrounding how to handle unwanted and, depending on the jurisdiction, illegal calls . Technologies such as STIR and SHAKEN address cryptographic signing and attestation, respectively, of signaling to ensure the integrity and authenticity of the asserted identity. This document describes a new SIP response code, 608, which allows calling parties to learn their call was rejected by an intermediary. As will be described below, we need a distinct indicator to differentiate between a user rejection and an intermediary's rejection of a call. In many jurisdictions, some calls, even if unwanted by the user, may not be blocked unless there is an explicit user request. Moreover, users may misidentify the nature of a caller. For example, a legitimate caller may call a user who finds the call to be unwanted. However, instead of marking the call as unwanted, the user may mark the call as illegal. With that information, an analytics engine may determine that all calls from that source should be blocked. However, in many jurisdictions blocking calls from that source from other users may not be legal. Likewise, one can envision jurisdictions that allow an operator to block such calls, but only if there is a remediation mechanism in place to address false positives. Today, some call blocking services may return responses such as 604 (Does Not Exist Anywhere). This might be a strategy to attempt to get a destination's address removed from a calling database. However, other network elements might interpret this to mean the user truly does not exist and result in the user not being able to receive calls. As well, in many jurisdictions, providing false signaling is illegal. The 608 response code addresses this need of addressing falsely blocked calls. Specifically, this code informs the UAC the call was blocked, the call was blocked by an intermediary, and, to satisfy some jurisdiction's requirements for providing a redress mechanism, how to contact the operator of the intermediary. In the call handling ecosystem, users can explicitly reject a call or later mark a call is being unwanted by issuing a 607 SIP response code (Unwanted). shows the operation of the 607 SIP response code. The UAS indicates the call was unwanted. As RFC8197 explains, not only does the called party desire to reject that call, they wish to let their proxy know they do not ever want to get calls from that source. The proxy may send call information to a call analytics engine. For various reasons described in RFC8197, if a network operator receives multiple reports of unwanted calls, that may indicate the entity placing the calls is likely to be a source of unwanted calls for many people. As such, other users of the service provider's service may wish the service provider to automatically reject calls on their behalf based on that and other analytics. Another value of the 607 rejection is presuming the proxy forwards the response code to the UAC, the calling UAC or intervening proxies know the user is not interested in receiving calls from that sender.

| Party | <-------> | UAC | +-----+ | Proxy | +-----+ +-----------+ ]]> For calls rejected with a 607 from a legitimate caller, receiving a 607 response code can inform the caller to stop attempting to call the user. Moreover, if the legitimate caller believes the user is rejecting their calls in error, they can use other channels to contact the user. For example, if a pharmacy calls a user to let them know their prescription is available for pickup and the user mistakenly thinks the call is unwanted and issues a 607 response code, the pharmacy, having an existing relationship with the customer, can send the user an email, also noting they might consider not rejecting their calls in the future.

| INVITE | | | | ------------------------------> | | | | | | | | 607 | | | <------------------------------ | | | | | | | Unwanted call | | | 607 | -----------------> | | | <-------------- | indicator | | | | | | ]]> However, things get more complicated if an intermediary, such as a third-party provider of call management services that classify calls based on the relative likelihood the call is unwanted, misidentifies the call as unwanted. shows this case. In this situation, it would be beneficial for the caller to be able to learn who rejected the call, so they might be able to correct the misidentification. In this situation, one might be tempted to have the intermediary use the 607 response code. 607 indicates to the caller the subscriber did not get the call and they do not want the call. However, RFC8197 specifies that one of the uses of 607 is to inform analytics engines that a user (human) has rejected a call. The problem here is network elements downstream from the intermediary might interpret the 607 as a user (human) marking the call as unwanted, as opposed to a statistical, machine learning, vulnerable to the base rate fallacy algorithm rejecting the call. In other words, those downstream entities should not be relying on another entity 'deciding' the call is unwanted. By distinguishing between a (human) user rejection and an intermediary's statistical rejection, a downstream network element that sees a 607 result code can weight it as a human rejection in its call analytics.

| UAC | +-----+ | Proxy | +-----+ +-----------+ ]]> It is useful for blocked callers to have a redress mechanism. One can imagine that some jurisdictions will require it. However, we must be mindful that most of the calls that will be blocked will, in fact, be illegal and eligible for blocking. Thus, providing alternate contact information for a user would be counterproductive to protecting that user from illegal communications. This is another reason we do not propose to simply allow alternate contact information in a 607 response message.

| Information from | | | | -----------------> | | | | INVITE | | | | Reject | | | 608 | <----------------- | | | <-------------- | call | | | | | | ]]> As such, we need a mechanism for indicating an intermediary rejected a call while providing contact information for the operator of the intermediary that provides call rejection services to the called party, without exposing the target user's contact information.

This document uses the terms "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" as described in BCP14 when, and only when, they appear in all capitals, as shown here.

For clarity, this section uses the term 'intermediary' as the entity that acts as a SIP User Agent Server (UAS) on behalf of the user in the network, as opposed to the user's UAS (colloquially, but not necessarily, their phone). The intermediary could be a back-to-back user agent (B2BUA) or a SIP Proxy. An intermediary MAY issue the 608 code in a failure response for an INVITE, MESSAGE, SUBSCRIBE, or other out-of-dialog SIP request to indicate that an intermediary rejected the offered communication as unwanted by the user. An intermediary MAY issue the 608 as the value of the "cause" parameter of a SIP reason-value in a Reason header field . Unless there are indicators the calling party will use the contents of the Call-Info header for malicious purposes (see ), if an intermediary issues a 608 code, the intermediary MUST include a Call-Info header in the response. Proxies need to be mindful that a downstream intermediary may reject the attempt with a 608 while other paths may still be in progress. In this situation, the requirements stated in Section 16.7 of RFC3261 apply. Specifically, the proxy should cancel pending transactions and must not create any new branches. Note this is not a new requirement but simply pointing out the existing 6xx protocol mechanism. If there is a Call-Info header, it MUST have the 'purpose' parameter of 'card'. The value of the Call-Info header MUST refer to a valid vCard object. The vCard referenced in the Call-Info header MUST include at least one of the URL, EMAIL, TEL, or ADR properties. UACs supporting this specification MUST be prepared to receive a full vCard. Call originators (at the UAC) can use the information returned by the vCard to contact the intermediary that rejected the call to appeal the intermediary's future blocking of the call attempt. What the intermediary does if the blocked caller contacts the intermediary is outside the scope of this document. Upon receiving a 608 response, UACs perform normal SIP processing for 6xx responses.

Given an INVITE (shamelessly taken from :

To: From: "Alice" ;tag=614bdb40 Call-ID: 79048YzkxNDA5NTI1MzA0OWFjOTFkMmFlODhiNTI2OWQ1ZTI P-Asserted-Identity: "Alice", CSeq: 2 INVITE Allow: SUBSCRIBE, NOTIFY, INVITE, ACK, CANCEL, BYE, REFER, INFO, MESSAGE, OPTIONS Content-Type: application/sdp Date: Tue, 16 Aug 2016 19:23:38 GMT Identity: eyJhbGciOiJFUzI1NiIsInR5cCI6InBhc3Nwb3J0IiwicHB0Ijoic2hha2VuIiwieDV1I joiaHR0cDovL2NlcnQtYXV0aC5wb2Muc3lzLmNvbWNhc3QubmV0L2V4YW1wbGUuY2VydC J9eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6IisxMjE1NTU1MTIxMyJ9LCJpYXQiOiI xNDcxMzc1NDE4Iiwib3JpZyI6eyJ0biI64oCdKzEyMTU1NTUxMjEyIn0sIm9yaWdpZCI6 IjEyM2U0NTY3LWU4OWItMTJkMy1hNDU2LTQyNjY1NTQ0MDAwMCJ9._28kAwRWnheXyA6n Y4MvmK5JKHZH9hSYkWI4g75mnq9Tj2lW4WPm0PlvudoGaj7wM5XujZUTb_3MA4modoDtC A;info=;alg=ES256 Content-Length: 153 v=0 o=- 13103070023943130 1 IN IP4 192.0.2.177 c=IN IP4 192.0.2.177 t=0 0 m=audio 54242 RTP/AVP 0 a=sendrecv]]> An intermediary could reply:

;tag=614bdb40 To: Call-ID: 79048YzkxNDA5NTI1MzA0OWFjOTFkMmFlODhiNTI2OWQ1ZTI CSeq: 2 INVITE Call-Info: ;purpose=card]]> A minimal vCard, in this example at https://blocker.example.net/complaints.vcf, could contain:

For an intermediary that provides a Web site for adjudication, the vCard could contain:

For an intermediary that provides a telephone number and a postal address, the vCard could contain:

Note that it is up to the receiver to decide which modality, if any, it will use.

This document registers a new SIP response code, 608. Please register the response code in the "Response Codes" subregistry of the "Session Initiation Protocol (SIP) Parameters" registry at <http://www.iana.org/assignments/sip-parameters>. Response code: 608 Description: Rejected Reference: [RFCXXXX]

Intermediary operators need to be mindful of whom they are sending the 608 response to. There is a risk that a truly malicious caller is being rejected. This raises two issues. The first is the caller, being alerted their call is being automatically rejected, may change their call behavior to defeat call blocking systems. The second, and more significant risk, is that by providing a contact modality in the Call-Info field, the intermediary may be giving the malicious caller a vector for attack. In other words, the intermediary will be publishing an address that a malicious actor may use to launch an attack on the intermediary. Because of this, intermediary operators may wish to configure their response to only include a Call-Info field for INVITE or other initiating methods that are signed by STIR.

This document liberally lifts from in its text and structure. However, the mechanism and purpose is quite different. Any errors are the current editor's and not the editor of RFC8197. Thanks also go to Ken Carlberg of the FCC, Russ Housley, Paul Kyzivat, and Tolga Asveren for their suggestions on improving the draft.